Not that I’m a slow worker or anything like that… The name boards, carved nearly a month ago are on the canoes. They are finished to match the canoes. Two coats of Cetol Marine went on first. That prevented paint, applied to the incisions, from running in end grain. A third coat of Cetol sealed them.
Placement varies from what the Brits use, smack in the middle of the sides, because those are spots where these boats ride against each other when being transported. Instead, I found relatively flat spots away from the middles. I also used some Dolfinite bedding compound on the green boat because those boards were being placed with attachment holes drilled into the flotation chamber.
The best thing about them is that they will usually be seen while the boat is bobbing around, and one can’t see both sides of a boat at the same time.
Leave a Reply